Microwave Biconical Antenna
The ABM-6000 Microwave Biconical antenna is specifically designed to be the transmit source antenna for test site validations above 1 GHz per the CISPR 16-1-4 Site Voltage Standing Wave Ratio (SVSWR) procedure.
- Frequency Range: 1 GHz to 6 GHz
- Dipole-like radiation pattern compliant with CISPR 16-1-4 requirements for >1 GHz site validation measurements
- Transmit or receive capability
- Three year warranty
- Antenna Type: Microwave Biconical
- Frequency Range: 1 to 6 GHz
- Antenna Factor: 32 to 46 dB/m
- Isotropic Gain: -3 to 4.5 dBi
- VSWR: 3:1 (average)
- 3 dB beam width: 75 to 95 degrees
- Impedance: 50 ohms (nominal)
- Inversion Symmetry: < 1 dB
- Cross-Polarization: > 20 dB rejection
- Overall length: 20.5" (52 cm)
- Maximum Width (elements): 2.5 inches (63.5 mm)
- Connector Type: N-type (female)
- Max. Input Power: 50 Watts
- Weight: 13 oz. (0.358 kg)
Quote Request
Other EMC Test Equipment
- Absorbing Clamps
- Antenna Kits
- Antenna Masts - Automated and Manual
- Antennas
- CDNs - Coupling Decoupling Network
- Comb Generators
- Conducted Immunity Test Systems
- Discontinued Products
- EM Clamps
- Feed Through Capacitor
- ISNs - Impedance Stabilization Network
- Line Impedance Stabilization Network
- Magnetic Field Generator
- Near Field Probes
- Power Amplifiers
- Pre-compliance Emissions Test Systems
- Preamplifiers
- RF Current & BCI Probes, Calibration Fixtures
- Spectrum Analyzers
- Surge Generators
- System Controllers
- Transient Limiters
- Tripods For EMC
- Turntables