Loop Antenna for Mil-Std
- The AL-RE101 is a receiving loop antenna used for MilStd 461, RE101 testing to measure the magnetic field intensity generated by the Equipment Under Test (EUT).
- The AL-RE101 Passive Loop Antenna is specifically designed for tests according to MIL-STD-461, RE101, radiated emissions, magnetic field.
- The antenna is individually calibrated using NIST Traceable equipment per SAE ARP-958 and MIL-STD-461. The calibration data, along with certificate, are provided.
- Recognized ISO 17025 accredited calibration is also available upon request
- Receiving Loop Antenna Designed Specifically for MIL-STD-461, RE101 Testing, FCC Part 15 & 18 KDB
- Frequency Range: 10 Hz to 1 MHz
- Antenna Base Plate Ensures Required 7 cm Separation Between Antenna and EUT
- Individual Calibration per SAE ARP958 Included
- Three-year Standard Warranty
- Model: AL-RE101
- Frequency Range: 30 Hz to 100 kHz (usable range: 10 Hz to 1 MHz)
- Loop Diameter: 13.3 cm
- Number of Turns: 36 Turns
- Wire Type: 7 Strand, 41 AWG Litz
- Loop Shielding: Electrostatic Shield
- Resistance of Wiring: 10Ω (nominal)
- Inductance of Wiring: 340 µH (nominal)
- Maximum Input Current: N/A
- Connectors: BNC (female)
- Specifications: MIL-STD-461, RE101, FCC Part 15 & 18 KDB
- Weight: 0.84 lbs. (0.38 kg)
Quote Request
Other EMC Test Equipment
- Absorbing Clamps
- Antenna Kits
- Antenna Masts - Automated and Manual
- Antennas
- CDNs - Coupling Decoupling Network
- Comb Generators
- Conducted Immunity Test Systems
- Discontinued Products
- EM Clamps
- Feed Through Capacitor
- ISNs - Impedance Stabilization Network
- Line Impedance Stabilization Network
- Magnetic Field Generator
- Near Field Probes
- Power Amplifiers
- Pre-compliance Emissions Test Systems
- Preamplifiers
- RF Current & BCI Probes, Calibration Fixtures
- Spectrum Analyzers
- Surge Generators
- System Controllers
- Transient Limiters
- Tripods For EMC
- Turntables