ISN / CDN for 50 ohm Coax Cable

CDN-C50E can be used as an ISN for measuring emissions on 50 Ohms coax cables per EN 55022/32.
Designed for testing products for conducted immunity per IEC/EN 61000-4-6 and CISPR 16-1-2 that uses 50 Ohm coaxial cables for data communication.
CDN-C50E is one of the series of Coupling/Decoupling Networks. It has 50 Ohm BNC connectors for both EUT and AE power connections.
The CDN-C50E can handle up to 1 Amp of current. The RF disturbance signal coupling port is female BNC. It can handle up to 40V of RF Input Voltage.
The bottom surface of the CDN is not painted for easy and effective grounding.
Com-Power CDNs are individually calibrated. All Com-Power CDNs can be purchased separately or as part of the CIS series conducted immunity test system.

Product Name: Coupling Decoupling Network (CDN)
Compliant Test Standards: IEC / EN 61000-4-6
Application: 50 Ohm Coaxial Cables
Frequency Range: 150 kHz to 230 MHz
RF Input Voltage: 40 V (Max)
RF Input Connector: 50 Ω BNC (Female)
Voltage Rating: 310 V AC / 440 V DC (Line to Ground)
Current Rating: 1 Amp (Max)
AE and EUT Connections: 50 Ohm Female BNC
Common Mode Impedance:
150 kHz - 26 MHz: 150Ω ± 20Ω
26 MHz - 80 MHz: 150Ω + 60Ω / – 45Ω
80 MHz - 230 MHz: 150Ω + 60Ω / – 60Ω
Voltage Division Factor: 9.5 dB +3 / -1
Decoupling of Common Mode Disturbance: ≥ 40dB (EUT/AE)
Dimensions: 6 x 6 x 13 inches or 15.2 x 15.2 x 33 cm
Weight: 5 lbs. or 2.3 kg
Accessories Available from Com-Power for setting test levels and running the test:
ADA-C50/C75 shorting adapters
ADA-515-2 150 Ω to 50 Ω adapters
TEP-050 50 Ω Terminator
ATTN-6-100W Power Attenuator
DCU-300-100W Directional Coupler
ASC series Power Amplifiers