3 Phase - Line Impedance Stabilization Network

3 Phase LISN for CISPR / ANSI The LI-3P-1x series consists of four separate models of four-conductor, 50Ω, 50 microhenry (μH) Line Impedance Stabilization Networks (LISNs).
The primary differences between the four models are their respective current ratings: LI-3P-116 16 Amps (per line, continuous) LI-3P-132 32 Amps (per line, continuous) LI-3P-163 63 Amps (per line, continuous) LI-3P-1100 100 Amps (per line, continuous) The side panels for each LISN are louvered for cooling purposes.
The LI-3P-163 and LI-3P-1100 also include two internal cooling fans operated by a switch on the rear panel.
Three-phase LISNs can be operated remotely or locally.
Remote switching of the line under test (L1, L2, L3, N) is performed using the RLI-100 Remote LISN Interface, which controls the LISN via fiber optic connection.
In addition to the remote method, the line under test can also be selected using the mechanical, four-position switch located on the front panel of the LISNs.
Using either switching method, the lines that are not selected are internally terminated into 50 ohms, while the selected line is terminated by the 50-ohm impedance of the measuring instrument.

Frequently bought together

CIS-25 conducted immunity test system + Add

CGC-255E comb generator + Add

CGO-51000 comb generator + Add

Frequency Range: 150 kHz to 30 MHz
Current Ratings of 16, 32, 63 and 100 Amps
Fully Compliant with CISPR 16-1-2/ANSI C63.4
Remote Switching of Line Under Test
Four-conductor, 50Ω, 50 microhenry (μH) Networks appropriate for both 3Ø Delta and Wye Power Configurations
Three-Year Warranty

Specifications